|
Joined: Jun 2006
Posts: 542
|
OP
Joined: Jun 2006
Posts: 542 |
I'd be VERY surprised to find that Don blessed this ring as it is. If he DID bless it, is it possible it was monkeyed with later? Also, considering that there are many fake Don Boyle certificates floating around, did he REALLY authenticate it? BEAR WITH ME HERE: The date suggests it is a transitional period. That could account for the early style skull. Germans are extremely traditional. Even though the ring was changed at one time, the basic pattern remained the same. Why would they make an experimental design, ESPECIALLY with leaves that don't even look like leaves? Even if that were the case, then where did the Ty-Rune go? I GUARANTEE you that this ring never left the Gahr factory with leaves that look like this. I would love for Don boyle to look at this ring and see what he says.
|
|
|
|
Joined: Sep 2000
Posts: 15,100 Likes: 102
|
Joined: Sep 2000
Posts: 15,100 Likes: 102 |
Josias,
You are posting some heavy duty assessments and accusations in this thread.
Please tell us who you are and what experience you have to be able to make these judgments with such confidence.
Dave Admin
|
|
|
|
Joined: Jun 2006
Posts: 542
|
OP
Joined: Jun 2006
Posts: 542 |
Opinions expressed on this forum are just that. No one accused anyone of anything. And if someone DID ever sell something that turned out to not be authentic, I automatically assume that it was NOT done so knowingly. This scenario is entirely possible, since no one is perfect in every assessment they make. It is a fact that Don's certificates have been faked and circulated. Therefore, the fact that a Don Boyle certificate accompanies an item, doesn't automatically prove it's authenticity. I don't question Don Boyle, only whether his certificates that are floating around are actually his. Collectors and prospective buyers post items and would like honest assessments, and that's what I gave. If there are those who think I'm wrong, they're free to tell me I'm full of crap, and hopefully, they'll at least give a reason. I've studied WWII artifacts for over 30 years, and the Totenkopfring for 25 years. That doesn't prove anything necessarily, but the totenkopfring is a well-sculptured work of art. As an artisan myself, I feel comfortable in saying with certainty that the outside of the Ebeling ring is in no way consistent with Gahr workmanship. Study the design carefully. It's not only poorly executed, but it doesn't even make sense. I've NEVER accused anyone on any forum of being dishonest, and have stated that if they don't want their items assessed on a forum, they should say so. I was under the impression that all opinions were welcome. Send the photos of the Ebeling ring to Don Boyle and ask him if he authenticated this ring. If he says so, this will be the first time I've ever disagreed with him.
|
|
|
|
Joined: Sep 2000
Posts: 15,100 Likes: 102
|
Joined: Sep 2000
Posts: 15,100 Likes: 102 |
Who are you ? You seem to be on other forums with other names. If you are that certain of your pronouncements, why not step up to the podium ?
|
|
|
|
Joined: Aug 2006
Posts: 25
|
Joined: Aug 2006
Posts: 25 |
Well perhaps it's time for me to help clear up this situation, as I am the current owner of the ring in question...the Dr. Ebeling ring.
Being a physician myself and a student of TR items, Honor Rings in particular, I had been on the look-out for a ring conferred to a doctor. This one popped up about two and a half years ago on Gottlieb's site, so I was naturally drawn to it. Craig's pictures as well as an in hand inspection revealed that someone had quite sloppily attempted to darken the deeper recesses of the ring. This was subsequently removed with acetone.
All of the concerns expressed here regarding the unusual appearance of the external portions of the ring, were also looked into. One does not spend that kind of money without proof of untampered with authenticity. Naturally, Don Boyle was contacted. I personally spoke with Don on the telephone at least ten times regarding this ring. He assured me that this ring was all original(except for the garbage that was removed with acetone). In fact, Don being Don, re-papered this ring in my name following an inspection after it's acetone bath. The ring has been in my possession since that time with its' original CoA, its' updated CoA and two other Honor Rings papered by Don. I personally would not own one that was not blessed by Don.
The line of ownership on this ring as best as I can remember is as follows...Andy Legere--->Craig Gottlieb--->Ed Augustine---> Craig Gottlieb--->me. Where the horrible attempt to darken the burnishing was made is anyone's guess.
Sorry for the long post, but I felt I needed to straighten this out and defend one of my items. I will post some better photos momentarily. Derek
|
|
|
|
Joined: Aug 2006
Posts: 25
|
Joined: Aug 2006
Posts: 25 |
G: Not sure why but I keep geting error messages when I try to attach photos. Any ideas? Thanks, Derek
|
|
|
|
Joined: Jun 2006
Posts: 542
|
OP
Joined: Jun 2006
Posts: 542 |
My name is Josias, and my brother and I have posted on here many times and on WA forum as SGStandard. There is no mystery, as we have posted the same items many times. We have always tried to be courteous and helpful. I don't doubt that the Ebeling ring is authentic, just re-tooled. If Don authenticated it this way, I'm surprised, and I respectfully disagree with him. I don't know how to do this, but if someone could post a pic of a 30's ring, this ring, and a 40's ring all together with a BACK view, showing the Ty-Rune area, and after looking at all three, you still insist that this Ebeling ring exhibits Gahr workmanship, I'll stop trying to convince you. FIRST OF ALL - The dark areas are more than just blackening. The metal is clearly carved that way. Look at the 3 o'clock area on the Ty-Rune circle and notice that even though the rune area is almost gone, MIRACULOUSLY, the outer circle has a deep groove. If the Ty-Rune was this worn, then there would be no groove there. The Ty-Rune would blend into the leaves. Look at this same area on the ring I posted. Also, show me just ONE ring with a skull with this much wear that has perfect teeth. There isn't any. As for the leaves, why would a company with such skilled craftsman make oak leaves that look NOTHING like oak leaves? I can barely tell they're leaves. It's simply illogical. I take no joy in proclaiming that I think something is wrong, but if I owned an artifact, I would hope that people gave their honest opinions. I don't questioning an item's originality lightly. If I see something I question, I try to share my ideas. I thought that was what the forum was for. If you think I'm full of crap, then so be it. Are we having fun yet?
|
|
|
|
Joined: Jun 2002
Posts: 12,191 Likes: 296
|
Joined: Jun 2002
Posts: 12,191 Likes: 296 |
Hi Derek,,, there is sometimes problems posting photos here ,,usually goes away in a day or so. Also,,I think the photo size limit is 100kb. IF you have a photo 100.01kb it will NOT post.. I also seem to remember Andy telling me it was NOT burnished like that when he had it,,so where did it come from?[please correct me if I'm wrong here!] *Dave,, Please let these guys go. They are all HR ring owners. A couple are even into making really nice copy rings. They have the right to question, and state their opinion,,,and they are saying why! This is still a forum as far as I'm concerned and as long as they are cool with the CoC and state their concerns all are welcome. This ring had a good size topic about it here. It's gone?! O.K., maybe... If I remember right Don has said he has only seen this exact pattern once or twice before.. IF ,I remember correctly this is a trans ring [39?] It could very well be a interim pattern that didn't pan out. Could be Don has some sort of info on it.. Don has told me time and time again,,that even in his own book he had held out on much info,,and even in helping Craig in his new book he did NOT reveal all.....I for one am glad he does it,,,we have enough problems with copies as it is.........
|
|
|
|
Joined: Aug 2006
Posts: 25
|
Joined: Aug 2006
Posts: 25 |
G: You are correct. Back when I purchased this ring, Don gave me Andy's cell number so that he could give all the info he had. He stated that the ring did not have this extra "burnishing" when it was his. Don, as you can imagine, also saw the ring while in Andy's possession and confirmed this. Derek
|
|
|
|
Joined: Sep 2002
Posts: 442
|
Joined: Sep 2002
Posts: 442 |
Josias, Thanks for all your inputs here,and Thanks to Gaspare for doing the right thing.
Sepp GDC 0292 Gold
|
|
|
|
Joined: Aug 2006
Posts: 25
|
Joined: Aug 2006
Posts: 25 |
|
|
|
|
Joined: Aug 2006
Posts: 25
|
Joined: Aug 2006
Posts: 25 |
|
|
|
|
Joined: Aug 2006
Posts: 25
|
Joined: Aug 2006
Posts: 25 |
|
|
|
|
Joined: Aug 2006
Posts: 25
|
Joined: Aug 2006
Posts: 25 |
|
|
|
|
Joined: Aug 2006
Posts: 25
|
Joined: Aug 2006
Posts: 25 |
|
|
|
|
Joined: Aug 2006
Posts: 25
|
Joined: Aug 2006
Posts: 25 |
|
|
|
|
Joined: Aug 2006
Posts: 25
|
Joined: Aug 2006
Posts: 25 |
|
|
|
|
Joined: Aug 2006
Posts: 25
|
Joined: Aug 2006
Posts: 25 |
So in closing, is this ring somewhat different?Yes it is. Is it papered by Don Boyle as an authentic, untampered with Honor Ring? Absolutely, and that's good enough for me. Derek
|
|
|
|
Joined: Jun 2002
Posts: 12,191 Likes: 296
|
Joined: Jun 2002
Posts: 12,191 Likes: 296 |
D. , spoke to Andy tonight,, I had forgotten where it originally came from.
I also remember Don spoke about this ring at a show when someone was asking about it. A super rare interim ring?? a one [?] off for a 1939 transitional? Maybe only a few were made off the master or rolling matrix before it broke making them go to the miss matched tranny rings? Questions,suppositions?,yes,, but I like that all day long.............
|
|
|
|
Joined: Jun 2006
Posts: 542
|
OP
Joined: Jun 2006
Posts: 542 |
dtl70-Thanks for the additional photos. The quality of the inside engraving absolutely PROVES that this is a REAL ring IMO. Whether or not I think that the outside was retooled doesn't really matter after that. Even if I'm correct in my position, the important thing is that it is a REAL SS Totenkopfring. Something Don Boyle told me a long time ago has always stuck with me. He said that one of the first things he always looks at is the inside engraving. With the plethora of "super-fakes" out there, this is good advice for all. CONGRATULATIONS!!
|
|
|
|
Joined: Dec 1999
Posts: 4,072
|
Joined: Dec 1999
Posts: 4,072 |
In my upcoming book, I deal with both the manufacturing process, and the question of transitional rings - the hows and whys. One small detail I can let out of the bag: rings were not made with a "rolling matrix" but were made like every other piece of jewelry made during the period - with a mold, created from a master ring. Molds were rountinely worn-out and replaced, but were made from one master ring. There was a master in the 1930s, and one in the 1940s, after the ring was redesigned. In the interim, it appears that Gahr experimented with several candidates before the style that we call the 1940s style, was adopted.
|
|
|
|
Joined: Jun 2006
Posts: 542
|
OP
Joined: Jun 2006
Posts: 542 |
CRAIG - Did you know that there was a company that made daggers called "Gottlieb Hammesfahr"? They were in Solingen. Their RZM code was: M7/67 As for the Ebeling ring, I e-mailed Don Boyle in hopes that he may have any more information concerning possible transition rings. I would like to see any photos of others. I should hear from him by tomorrow.
|
|
|
|
Joined: Nov 2004
Posts: 19
|
Joined: Nov 2004
Posts: 19 |
quote: Molds were rountinely worn-out and replaced
How could a mold wear out? I could see a die wearing out. BTW Elvis Presley's jeweler still has the molds to a lot of his jewelry from the 60s & 70s those molds are still good and still being used.
|
|
|
|
Joined: Jun 2006
Posts: 542
|
OP
Joined: Jun 2006
Posts: 542 |
Once a "Master" ring is cast from the original wax carving, then a rubber mold is made from this Master. This rubber mold is then used to make more wax rings, which in turn will be cast into silver.This is how the copies have the same sculpting flaws that the original Master has. These rubber molds were probably good for only about a thousand copies before they wear out. Therefore, they probably had several rubber molds going at the same time, but since they were made from the same Master ring, they should be identical.
|
|
|
|
Joined: Jan 2009
Posts: 24
|
Joined: Jan 2009
Posts: 24 |
These "transition" rings bother me a lot. I understand the SS was very exacting in everything produced for their members. Why would they release these few rings without the final approval for production style? I doesn't make sense knowing how precise and specific so many of their other regalia is. ?????
|
|
|
|
Joined: Jun 2006
Posts: 542
|
OP
Joined: Jun 2006
Posts: 542 |
11C - In my opinion, there were only 2 styles of Totenkopfrings, the early flatter style, and the later, more convex, 40's style. The only "transitional" TK rings that exist are ones that may exhibit qualities of both. For example, a 2nd style band with a 1st style skull. Or perhaps a second style band, with the earlier, larger inside inscription. I have ZERO doubts that the "Ebeling" ring is an original ring that someone tried to enhance the outer design. If someone can explain to me how the Ty-Rune is almost completely worn away, but yet the Ty-Rune outer circle and the surrounding leaves are deeply carved, I may agree, but you CAN'T. It is physically IMPOSSIBLE for the Ty-Rune to wear like this. Period. Take a GOOD LOOK at the Ty-Rune, and you'll see what most of the ring looked like before it was re-tooled. The worn skull corroborates this theory. Is there someone out there who can look at this worn skull and tell me how the teeth are still perfect? It's called RE-TOOLING. Are we expected to believe also that the "beaded" effect along the edges is original also? To believe that the Ebeling ring is untouched, you'd have to believe that the Gahr factory knew how to sculpt oak leaves in the 30's, by 1939 they forgot how to make them, then in the 40's remembered again how they're supposed to look. The only thing "transitional" about the "Ebeling" ring is the early style skull on a later style band. (PS - Just for fun, I showed photos of the Ebeling ring to the members of our art department at work, along with photos of a mint original. I asked if the oak leaves on the Ebeling ring were executed by the same company that made the other Gahr TK ring. Without hesitation, to a person, they said it was impossible. They said that the leaves looked like a toddler carved them. And not a particularly talented toddler.) 11C has it right. Why would a traditional German silversmith make a ring with oak leaves, then make a special model that looks like seaweed, then go back to making leaves that look real again? This is called FANTASYLAND. For those doubters, go back and study each leaf on the Ebeling ring, and you'll see MANY things that don't make sense - half leaves, deformed leaves, etc. This is more apparent on the back of the ring where most of the design was gone, so they improvised on how they THOUGHT it should look. The Ebeling ring is a VERY RARE original ring that someone tried to restore. It's a cruel world.
|
|
|
|
Joined: Nov 2004
Posts: 19
|
Joined: Nov 2004
Posts: 19 |
I agree it's an original ring and that it has been "enhanced." That being said, I wouldn't mind having it in my collection.
|
|
|
|
Joined: Jun 2006
Posts: 542
|
OP
Joined: Jun 2006
Posts: 542 |
I didn't mean to be so tough on this ring, but I had to call it like I saw it. My main point was NOT to discredit the ring itself, but discredit the famous "Third Die" experimental theory, which I believe has no basis in fact. As for the Ebeling ring, it's authenticity is unquestioned from Don Boyle on down.
|
|
|
|
Joined: Dec 1999
Posts: 4,072
|
Joined: Dec 1999
Posts: 4,072 |
Josias is basically correct - the molds do wear out from use, and have to be occasionally replaced. This still happens in jewelry making today. Regarding "Transitional Rings" - our belief in variation during the year 1939 is based only upon deductive reasoning from rings we do observe that do not fit into the 1930s category or the 1940s category. To learn why "transitional" products often suffer flaws and faults, look at the automobile industry. With Corvettes, for example, it is commonly known that the first year of major model overhauls (63 and 68, and 84 come to mind) produced some terrible vehicles.
|
|
|
|
Joined: Oct 2001
Posts: 4,426
|
Joined: Oct 2001
Posts: 4,426 |
these are always terrible vehicles
|
|
|
|
Joined: Dec 2005
Posts: 2,026
|
Joined: Dec 2005
Posts: 2,026 |
On the subject of The book. Is it ready too be mailed yet ?
"Those who do not remember the past are condemned to relive it" Santayana
|
|
|
|
Joined: Jan 2009
Posts: 24
|
Joined: Jan 2009
Posts: 24 |
Rings to Cars..........Duh? That's the worst analogy I ever heard. BTW I'll take a '63 split window Corvette any day of the week.
|
|
|
|
Joined: Dec 1999
Posts: 4,072
|
Joined: Dec 1999
Posts: 4,072 |
Yes, the book is now available - I received my first copies today, and the pre-orders will begin shipping next week.
And of course I freely admit, the Corvette analogy is certainly not perfect. The only similarity it was meant to draw was that 1939 was a year that Gahr used to transition to the "new body style" so to speak. Incidentally, the 63 Split Window is a great car, and I'd love to have one - despite the "new model" flaws. I used to have a 1970 (couldn't afford a 63-67 body style, which was my favorite).
|
|
|
|
Joined: Dec 2005
Posts: 2,026
|
Joined: Dec 2005
Posts: 2,026 |
That is good news about the book. I will be watching for mine in the mail.Many times one little piece of information in a book can make or save a person lots of $. (:}X
"Those who do not remember the past are condemned to relive it" Santayana
|
|
|
|
Joined: Dec 1999
Posts: 4,072
|
Joined: Dec 1999
Posts: 4,072 |
Again, I apologize for the 2 month printing delay. I was hoping to ship before December 25, 2008, but the death of Peter Schiffer senior and their printing problem in China, delayed it a bit (understandably).
|
|
|
Forums42
Topics31,673
Posts329,328
Members7,547
|
Most Online5,900 Dec 19th, 2019
|
|
|
|